Quick Add Related Products
The products listed below are selected to compliment or work best with this product. Simply tick the box beside the product and select the quantity you require, and click the add to basket button below the list, or click the product name to view the product in more detail. Some products will require selection of options, so cannot be added directly from here. If this is the case, simply click the product name to go to the product page to select your options.
| Buy | Name | Price |
|---|---|---|
| Anker Stuy Hydrolux End Grain Sealer - Clear | £11.50 | |
| Anker Stuy Hydrolux End Grain Sealer - White | £11.50 | |
| Sayerlack XA469 End Grain Sealer | £14.85 |
SKU: 9815-5 9001
Anker Stuy Hydrolux Filling Primer
In Stock
£150.00
- 20 Litres
- Water borne primer/midcoat
- Achieve a uniform smooth surface
| Quantity | Discount (%) | Price |
|---|---|---|
| 1 - 10 | — | £150.00 |
| 11 - 21 | 3.33 % | £145.00 |
| 22+ | 13.33 % | £130.00 |
Description
Description
Anker Stuy Hydrolux Filling Primer
Anker Stuy Hydrolux Filling Primer is a white, quick drying, water borne primer/midcoat, designed to fill the grain and to achieve a uniform smooth surface that also hides laminations and finger joint connections.
Who is Anker Stuy Hydrolux Filling Primer for?
Anker Stuy Hydrolux Filling Primer is for use on timber windows and doors and is formulated to fill the pores on open grain hardwoods and to hide finger joints on engineered timber. It is suitable for all commonly used timber species as long as the substrate is clean dry and free from dust, dirt, grease, silicone, and wax.
Hydrolux Filling Primer is for spray application.
This product is thinnable with clean water and used equipment is to be cleaned with warm water.
Benefits of Anker Stuy Hydrolux Filling Primer
Anker Stuy Hydrolux Filling Primer is particularly suitable for force drying with high temperature and low humidity. It also contains special Tri-Cryl technology to provide exceptional wet adhesion and low water uptake. Hydrolux Filling Primer has excellent coverage and filling properties and very good adhesion to wood with a very low water uptake ensuring better weather protection.
Additional information
Additional information
| Dust Dry* | 30 Minutes |
| Re-coatable* | 2 Hours |
| Timber Moisture | 12% – 16% |
| Max. Humidity | 85% |
| Min. Application Temperature | Min. 8°C |
*These drying times are just an estimate and will be affected by drying conditions
The information given is a general product description based on Anker Stuy experiences and tests therefor does not represent a specific practical case therefor Anker Stuy Coatings doesn’t guarantee the functionality or result and takes no responsibility in this respect.
Typical Paint System
Typical Paint System
2 coats of Anker Stuy Hydrolux Filling Primer followed by a coat of Anker Stuy Hydrolux Topcoat
