Jotun Jota Armour Standard Anti-Slip
£152.40 – £165.00
- Non-slip surface
- NORSOK pre-qualification
- Includes components A, B, and C
Jotun Jota Armour
Jotun Jota Armour is a three-component abrasion resistant polyamine cured epoxy coating which is specially designed as an anti-skid coating.
Who is Jotun Jota Armour for?
Jotun Jota Armour is suitable for use on metallic substrates coated with approved primers and on concrete coated with suitable sealer. It can be used on helidecks, walkways, ramps, weigh bridge decks, and decks in general where abrasion resistance and non-slip properties are required.
Jotun Jota Armour can be applied by gravity fed hopper gun or other suitable equipment.
Pros & Cons of Jotun Jota Armour
– Abrasion resistant
– Can be applied direct to concrete
– Need to Mix all 3 Parts
– Needs to be used within 2 hours of being mixed (at 23 ºC)
|Mixing Ratio||Comes as a kit, mix all 3 parts as per data sheet|
|Pot Life Once Mixed @ 23ºC||2 Hours (10 mins induction time)|
|Dry Film Thickness||750-3000 µm|
|Wet Film Thickness||830-3330 µm|
|Theoretical Spreading Rate||1.2-0.3 M²/L|
|Surface (touch) Dry @ 23ºC||5 Hours|
|Walk-On-Dry @ 23ºC||14 Hours|
|Dried/Cured for Service @ 23 ºC||7 Days|
This information is given to the best of Jotun’s knowledge based on lab testing and experience