Jotun Penguard Express MIO

In Stock

£58.25£192.05

  • Fast drying
  • Micaceous iron oxide (MIO) pigmented
  • Includes Hardener

Read full description

Clear

Delivery information

Manufacturer: Jotun
Tags: ,
Share on:

Description

Description

Jotun Penguard Express MIO
Jotun Penguard Express MIO is a two-component amine cured epoxy coating which is fast drying, micaceous iron oxide (MIO) pigmented, high solids and high build. It is specially designed for new construction where fast dry to handle and over-coating times are required and can also be applied at sub-zero temperatures.

Who is Jotun Penguard Express MIO for?
Jotun Penguard Express MIO can be used as a primer, mid coat, finish coat, or as a single coat system in atmospheric environments and is suitable for properly prepared carbon steel, stainless steel, aluminium and concrete substrates, and can be used on structural steel and popping to be exposed to highly corrosive environments. Penguard Express MIO is recommended for offshore environments, refineries, power plants, bridges, buildings, and mining equipment
Jotun Penguard Express MIO can be applied using airless spray, or a brush is recommended for stipe coating and small areas with care taken to achieve the specified dry film thickness.

Pros & Cons of Jotun Penguard Express MIO
Pros:
– Fast Drying
– High Solids and High Build
– Can be applied at sub-zero temperatures.

Cons:
– Need to Mix Both Parts
– Needs to be used within 2 hours of being mixed (at 23 ºC)

Costs of Jotun Penguard Express MIO
Jotun Penguard Express MIO would normally cost between £9 and £11 per litre. The main factor that affects the costs of this product. Is the quantity purchased, with larger quantities i.e., 20 litre tin over against 5 litre tins, the cost per litre goes down.

Additional information

Additional information

Mixing Ratio 4 Parts (comp A) to 1 Part (comp B)
Pot Life Once Mixed @ 23ºC 2 Hours
Dry Film Thickness 75-250 µm
Wet Film Thickness 100-340 µm
Theoretical Spreading Rate 9.9-3 M²/L
Surface (touch) Dry @ 23ºC 1 Hours
Walk-On-Dry @ 23ºC 2 Hours
Dried/Cured for Service @ 23 ºC 4 Days

This information is given to the best of Jotun’s knowledge based on lab testing and experience

 

Downloads