Jotun Penguard HSP ZP

In Stock

£140.00

  • Fast drying
  • Includes Hardener
  • Very good water resistance

Read full description

Clear

Delivery information

Manufacturer:Jotun
Tags: ,
Share on:

Description

Description

Jotun Penguard HSP ZP
Jotun Penguard HSP ZP is a two-component amine cured epoxy coating which Is fast drying, zinc phosphate pigmented, high solids and high build and specially designed for new construction where fast dry to handle and over-coating times are required.

Who is Jotun Penguard HSP ZP for?
Jotun Penguard HSP ZP can be used as a primer or in atmospheric environments. It is suitable for properly prepared aluminium, carbon steel substrates. Penguard HSP ZP is recommended for structural steel and pipping to be exposed to corrosive environments for example power plants, airports, buildings, refineries, and mining equipment. It designed as a primer for Jotun’s Steelmaster Intumescent thin film passive fire protection coatings.
Jotun Penguard HSP ZP can be applied using airless spray, or a brush is recommended for stripe coating and small areas with care taken to achieve the specified dry film thickness

Pros & Cons of Jotun Penguard HSP ZP
Pros:
– Fast drying
– Zinc phosphate pigmented
– High Solids and High Build

Cons:
– Need to Mix Both Parts
– Needs to be used within 2 hours of being mixed (at 23 ºC)

Costs of Jotun Penguard HSP ZP
Jotun Penguard HSP ZP would normally cost between £8 and £10 per litre. The main factor that affects the costs of this product is the quantity purchased i.e., a 20 litre tin over against a 5 litre tin the cost goes down.

Additional information

Additional information

Mixing Ratio4 Parts (comp A) to 1 Part (comp B)
Pot Life Once Mixed @ 23ºC2 Hours
Dry Film Thickness60-250 µm
Wet Film Thickness85-340 µm
Theoretical Spreading Rate12-3 M²/L
Surface (touch) Dry @ 23ºC1 Hours
Walk-On-Dry @ 23ºC3 Hours
Dried/Cured for Service @ 23 ºC4 Days

This information is given to the best of Jotun’s knowledge based on lab testing and experience

 

Downloads