SKU: 9160-X X00

Jotun Penguard HSP

In Stock


  • Fast drying
  • Includes Hardener
  • Very good water resistance

Read full description


Delivery information

Manufacturer: Jotun
Tags: ,
Share on:



Jotun Penguard HSP
Jotun Penguard HSP is a two-component amine cured epoxy coating which Is fast drying, high solids and high build and specially designed for new construction where fast dry to handle and over coating times are required.

Who is Jotun Penguard HSP for?
Jotun Penguard HSP can be used as a primer or mid coat in atmospheric environments. It is suitable for properly prepared aluminium, carbon steel, galvanised steel, shop primed steel and stainless steel. Penguard HSP is recommended for structural steel and pipping to be exposed to corrosive environments for example power plants, airports, buildings, refineries and mining equipment.
Jotun Penguard HSP can be applied using airless spray, or a brush is recommended for stripe coating and small areas with care taken to achieve the specified dry film thickness

Pros & Cons of Jotun Penguard HSP
– High Solids
– High Build
– Fast drying

– Need to Mix Both Parts
– Needs to be used within 2 hours of being mixed (at 23 ºC)

Costs of Jotun Penguard HSP
Jotun Penguard HSP would normally cost between £8 and £10 per litre. The main factor that affects the costs of this product is the quantity purchased i.e. a 20 litre tin over against a 5 litre tin the cost goes down.

Additional information

Additional information

Mixing Ratio 4 Parts (comp A) to 1 Part (comp B)
Pot Life Once Mixed @ 23ºC 2 Hours
Dry Film Thickness 60-250 µm
Wet Film Thickness 85-340 µm
Theoretical Spreading Rate 12-3 M²/L
Surface (touch) Dry @ 23ºC 1 Hours
Walk-On-Dry @ 23ºC 3 Hours
Dried/Cured for Service @ 23 ºC 4 Days

This information is given to the best of Jotun’s knowledge based on lab testing and experience