SKU: 9150-4 7802

Jotun Resist 86

In Stock

£250.00

  • 10.6 Litres
  • Includes Hardener
  • Heavy duty primer

Read full description

Delivery information

Manufacturer:Jotun
Tags: ,
Share on:

Description

Description

Jotun Resist 86
Jotun Resist 86 is a two-component moisture curing inorganic zinc ethyl silicate coating which is fast curing and very high zinc dust containing. It provides excellent corrosion protection as a single coat or part of a complete coating system and is heat resistant up to 540°C.

Who’s Resist 86 for
Jotun Resist 86 is to be used as a primer in a coating system and as a single coat system in atmospheric environments on properly prepared carbon steel substrates only. It is suitable for structural steel and pipping to be exposed to highly corrosive environments and recommended for offshore environments, refineries, power plants, bridges, building, mining equipment and general structural steel. Resist 86 is specially designed as a primer in coating systems where extended durability is required.
Jotun Resist 86 can be applied using airless or conventional spray or a brush is recommended for stripe coating and small areas with care taken to achieve the specified dry film thickness. To avoid settling of heavy zinc, continuous mechanical stirring during application is recommended.

Pros & Cons of Jotun Resist 86
Pros:
– Fast curing
– High zinc dust
– Excellent corrosion protection
– Heat resistant up to 540°C

Cons:
– Need to Mix Both Parts
– Needs to be used within 8 hours of being mixed (at 23 ºC)

Additional information

Additional information

Mixing Ratio8 Parts (comp A) to 2.6 Part (comp B)
Pot Life Once Mixed @ 23ºC8 Hours
Dry Film Thickness50-90 µm
Wet Film Thickness75-135 µm
Theoretical Spreading Rate13.4-7.4 M²/L
Surface (touch) Dry @ 23ºC15 Minutes
Walk-On-Dry @ 23ºC30 Minutes
Dried/Cured for Service @ 23ºC4 Hours

This information is given to the best of Jotun’s knowledge based on lab testing and experience

 

Downloads