Jotun Safeguard Universal ES – 18 Litre

In Stock

From £165.80(ex VAT)

  • Good anticorrosion protection
  • Can be applied at sub-zero surface temperatures
  • Includes Hardener

Read full description


Delivery information

Manufacturer: Jotun
Share on:



Jotun Safeguard Universal

Jotun Safeguard Universal is a two-component polyamide cure vinyl epoxy-based coating designed as a tie coat between epoxy primers and antifouling systems and can be used as a tie coat for a wide range of topcoats. Safeguard universal can be applied at sub-zero temperatures

Who’s Jotun Safeguard Universal for

Jotun Safeguard Universal is to be used as a tie coat in atmospheric and immersed environments and is suitable for use on approved primers on aluminium, carbon steel, galvanised and stainless-steel substrates. It can be used in the marine industry on outside hull, and maybe used on superstructures, decks and other external areas or Safeguard Universal can be used as a protective coating for offshore environments including splash zones, water inlets, cooling pipes, jetties, and bridges.

Jotun Safeguard Universal can be applies using airless spray or a brush is recommended for stripe coating and small areas with care taken to achieve the specified dry film thickness.

Pros & Cons of Jotun Safeguard Universal

– Can be applied at sub-zero temperatures
– Heat resistance: Dry, atmospheric: 90°C continuous, 110°C peak
– Heat resistance: Immersed, sea water: 40°C continuous, 50°C peak

– Need to Mix Both Parts
– Needs to be used within 2 hours of being mixed (at 23 ºC)

Additional information

Additional information

Mixing Ratio 4 Parts (comp A) to 1 Part (comp B)
Pot Life Once Mixed @ 23ºC 2 Hours
Dry Film Thickness 50-200 µm
Wet Film Thickness 80-325 µm
Theoretical Spreading Rate 12.4 – 3.1 M²/L
Surface (touch) Dry @ 23ºC 2 Hours
Walk-on-Dry @ 23ºC 10 Hours
Dried Cured for Service @ 23 ºC 3 Days

This information is given to the best of Jotun’s knowledge based on lab testing and experience