Quick Add Related Products
The products listed below are selected to compliment or work best with this product. Simply tick the box beside the product and select the quantity you require, and click the add to basket button below the list, or click the product name to view the product in more detail. Some products will require selection of options, so cannot be added directly from here. If this is the case, simply click the product name to go to the product page to select your options.
|Jotun No. 17 Thinners - 5 Litre||£38.50|
|Jotun No. 17 Thinners - 20 Litre||£122.55|
Jotun Tankguard DW Epoxy White Coating – 15 Litres
- Solvent free
- Potable water/drinking water approvals – BS 6920
- Includes Hardener
Jotun Tankguard DW
Jotun Tankguard DW is a two component, solvent free amine cure epoxy coating which is specially designed for drinking water tanks.
Who’s Jotun Tankguard DW for
Jotun Tankguard DW can be used as a primer and finish coat in atmospheric and immersed environments and is suitable for properly prepared carbon steel, stainless steel, aluminium, composites and concrete substrates. Tankguard DW is to be used as a coating for potable water tanks and pipes and is independently tested and certified for potable water storage.
Jotun Tankguard DW can be applied using airless spray or a brush is recommended for stripe coating and small areas with care taken to achieve the specified dry film thickness.
Pros & Cons of Jotun Tankguard DW
– Solvent free
– Designed for drinking water tanks
– Need to Mix Both Parts
– Needs to be used within 30 Minutes of being mixed (at 23 ºC)
|Mixing Ratio||2 Parts (comp A) to 1 Part (comp B)|
|Pot Life Once Mixed @ 23ºC||30 Minutes|
|Dry Film Thickness||150-400 µm|
|Wet Film Thickness||150-400 µm|
|Theoretical Spreading Rate||6.7 – 2.5 M²/L|
|Surface (touch) Dry @ 23ºC||10 Hours|
|Walk-on-Dry @ 23ºC||13 Hours|
|Dried Cured for Service @ 23 ºC||7 Days|
This information is given to the best of Jotun’s knowledge based on lab testing and experience