Quick Add Related Products
The products listed below are selected to compliment or work best with this product. Simply tick the box beside the product and select the quantity you require, and click the add to basket button below the list, or click the product name to view the product in more detail. Some products will require selection of options, so cannot be added directly from here. If this is the case, simply click the product name to go to the product page to select your options.
| Buy | Name | Price |
|---|---|---|
| Jotun No. 23 Thinners - 5 Litre | £32.75 | |
| Jotun No. 23 Thinners - 20 Litre | £134.70 |
Jotun Tankguard HB – 20 Litres
In Stock
£209.40
- High build
- Excellent resistance to chemicals and solvent resistance
- Includes Hardener
Description
Description
Jotun Tankguard HB
Jotun Tankguard HB is a two-component polyamine cured epoxy coating that has good chemical resistance.
Who’s Jotun Tankguard HB for
Jotun Tankguard HB can be used as a primer, mid coat, or finish coat in atmospheric and immersed environments and is suitable for properly prepared carbon steel, galvanised steel, stainless steel and concrete substrates. Tankguard HB can be used in the marine industry as an internal tank coating for grey water, drilling mud, brine, and crude oil tanks. It can also be used as a protective internal lining for offshore, onshore, and buried tanks and pipes.
Jotun Tankguard HB can be applied using airless spray, or a brush is recommended for stripe coating and small areas with care taken to achieve the specified film thickness. A roller must only be used for applying to scallops, ratholes and small pipes etc.
Pros & Cons of Jotun Tankguard HB
Pros:
– Good chemical resistance
– Good resistance to a wide range of products
Cons:
– Need to Mix Both Parts
– Needs to be used within 8 hours of being mixed (at 23 ºC)
Additional information
Additional information
| Mixing Ratio | 4 Parts (comp A) to 1 Part (comp B) |
| Pot Life Once Mixed @ 23ºC | 8 Hours |
| Dry Film Thickness | 80-160 µm |
| Wet Film Thickness | 160-320 µm |
| Theoretical Spreading Rate | 6.3 – 3.1 M²/L |
| Surface (touch) Dry @ 23ºC | 3.5 Hours |
| Walk-on-Dry @ 23ºC | 6 Hours |
| Dried Cured for Service @ 23 ºC | 7 Days |
This information is given to the best of Jotun’s knowledge based on lab testing and experience
