Quick Add Related Products
The products listed below are selected to compliment or work best with this product. Simply tick the box beside the product and select the quantity you require, and click the add to basket button below the list, or click the product name to view the product in more detail. Some products will require selection of options, so cannot be added directly from here. If this is the case, simply click the product name to go to the product page to select your options.
|Jotun No. 7 Thinners - 5 Litre||£26.50(ex VAT)|
|Jotun No. 7 Thinners - 20 Litre||£105.00(ex VAT)|
Jotun Vinyguard Silvergrey 88
- Quick drying
- Good resistance to water, abrasion and chemicals
- Cures at low temperatures
- Suitable for properly prepared carbon steel substrates
Vinyguard Silvergrey 88 is a single pack, quick drying, modified vinyl coating. It can be used as primer or mid coat in atmospheric and immersed environments. Suitable for properly prepared mild steel substrates under alkyd and acrylic coatings; as a tie coat for antifouling systems; and for topside, deck and superstructure in the marine industry.
Surface Preparation: All surfaces should be clean, dry and free from contamination. The surface should be assessed and treated in accordance with ISO 8504.
Bare steel: Blast-cleaning to Sa 21⁄2 (ISO-8501-1:1988). Power tool cleaning to min. St 2 (ISO 8501-1:1988) may be acceptable, subjected to exposure conditions.
Shopprimed steel: Clean, dry and undamaged approved shopprimer.
Coated surfaces: Clean, dry and undamaged compatible primer.
Other surfaces: The coating may be used on other substrates.
Please contact us for more information.
Typical Paint System: Vinyguard Silvergrey 88 2 x 80 μm (Dry Film Thickness) followed by Pioner Topcoat 1 x 50 μm (Dry Film Thickness) OR, Pilot II 1 x 40 μm (Dry Film Thickness). Other systems may be specified, depending on area of use.
Typical Use: Suitable for properly prepared mild steel substrates under alkyd and acrylic coatings and as a tie coat for antifouling systems.
Marine: Recommended for topside, deck and superstructure. As tie coat for antifouling systems.
Spray: Use air spray or airless spray.
Brush: Recommended for stripe coating and small areas. Care must be taken to achieve the specified dry film thickness.
Roller: May be used for small areas. Not recommended for first primer coat. Care must be taken to achieve the specified dry film thickness.
|Application Method||Air / Airless Spray, Brush or Roller|
|Surfaces||Marine – Topside, Deck, Superstructure|
|VOC Level||540g / Litre|
|Coverage||3.8m² / Litre|
|Touch Dry||20 Minutes @ 10°C / 10 Minutes @ 40°C|
|Over-Coating||3 Hours @ 10°C / 2 Hours @ 40°C|
|Maintenance Cycle||4 Years|
|Thinning & Cleaning||Jotun No.7|
|Number of Coats||2|