Jotun Barrier 80

In Stock

£187.60

  • High solids
  • Designed for severe corrosive environments
  • Includes Hardener

Read full description

Delivery information

Manufacturer: Jotun
Tags:
Share on:

Description

Description

Jotun Barrier 80
Jotun Barrier 80 is a two-component polyamide cured zinc rich epoxy coating.

Who’s Jotun Barrier 80 for
Jotun Barrier 80 is to be used as a primer in atmospheric environments and is suitable for carbon steel, repair of inorganic zinc silicate coating and damaged galvanised steel substrates. It is used for structural steel and piping to be exposed to highly corrosive environments and recommended for refineries, power plants, bridges, mining equipment and general structural steel. Jotun Barrier is specially designed as a primer in coating systems where extended durability is required.
Jotun Barrier 80 can be applied using airless spray or a brush his recommended for stripe coating and small areas with care taken to achieve the specified dry film thickness.

Pros & Cons of Jotun Barrier 80
Pros:
– Extended durability
– High zinc dust containing
– Provides very good corrosion protection

Cons:
– Need to Mix Both Parts
– Needs to be used within 12 Hours of being mixed (at 23 ºC)

 

Additional information

Additional information

Dry Film Thickness 40-90 µm
Wet Film Thickness 65-150 µm
Theoretical Spreading Rate 15.3-6.8 M²/L
Surface (touch) Dry @ 23ºC 10 Minutes
Walk-On-Dry @ 23ºC 1.5 Hours
Dried/Cured for Service @ 23 ºC 5 Days

This information is given to the best of Jotun’s knowledge based on lab testing and experience

 

Downloads