Quick Add Related Products
The products listed below are selected to compliment or work best with this product. Simply tick the box beside the product and select the quantity you require, and click the add to basket button below the list, or click the product name to view the product in more detail. Some products will require selection of options, so cannot be added directly from here. If this is the case, simply click the product name to go to the product page to select your options.
|Jotun No. 25 Thinners - 5 Litre||£49.61|
|Jotun No. 25 Thinners - 20 Litre||£173.75|
|Jotun No. 4 Thinners - 5 Litre||£44.00|
|Jotun No. 4 Thinners - 20 Litre||£218.08|
SKU: 9150-4 7802
Jotun Resist 86
- 10.6 Litres
- Includes Hardener
- Heavy duty primer
Jotun Resist 86
Jotun Resist 86 is a two-component moisture curing inorganic zinc ethyl silicate coating which is fast curing and very high zinc dust containing. It provides excellent corrosion protection as a single coat or part of a complete coating system and is heat resistant up to 540°C.
Who’s Resist 86 for
Jotun Resist 86 is to be used as a primer in a coating system and as a single coat system in atmospheric environments on properly prepared carbon steel substrates only. It is suitable for structural steel and pipping to be exposed to highly corrosive environments and recommended for offshore environments, refineries, power plants, bridges, building, mining equipment and general structural steel. Resist 86 is specially designed as a primer in coating systems where extended durability is required.
Jotun Resist 86 can be applied using airless or conventional spray or a brush is recommended for stripe coating and small areas with care taken to achieve the specified dry film thickness. To avoid settling of heavy zinc, continuous mechanical stirring during application is recommended.
Pros & Cons of Jotun Resist 86
– Fast curing
– High zinc dust
– Excellent corrosion protection
– Heat resistant up to 540°C
– Need to Mix Both Parts
– Needs to be used within 8 hours of being mixed (at 23 ºC)
|Mixing Ratio||8 Parts (comp A) to 2.6 Part (comp B)|
|Pot Life Once Mixed @ 23ºC||8 Hours|
|Dry Film Thickness||50-90 µm|
|Wet Film Thickness||75-135 µm|
|Theoretical Spreading Rate||13.4-7.4 M²/L|
|Surface (touch) Dry @ 23ºC||15 Minutes|
|Walk-On-Dry @ 23ºC||30 Minutes|
|Dried/Cured for Service @ 23ºC||4 Hours|
This information is given to the best of Jotun’s knowledge based on lab testing and experience