Marathon Primagalv Coating

In Stock

From £44.30(ex VAT)

  • Easy to use, quick drying, single pack, high build product
  • Contains 92% Zinc by weight in the dry coating
  • Excellent cathodic protection against rust

Read full description


Delivery information

Share on:



Marathon Primagalv is a fabrication / shop primer based on a synthetic polymer containing 92% Zinc. This is left in the dry film of the coating to act as a rust Inhibitor and offering long term protection of the substrate. Alternative to galvanising.

Benefits of Primagalv

Often used on steel in areas where corrosion will be imminent such as gates, railings and barriers in costal or roadside environments. Can be over coated for cosmetic reasons with a wide range of topcoats. Primagalv is ideally suited to spot priming, rust prevention and touching up of galvanised steel.

Surface Preparation: All surfaces to be clean, dry and free of contamination. Blast clean steel to SA 2½ or abrade mechanically.

Typical Paint System: 2 x 50 μm Primagalv coating (DFT). Other systems may be specified, depending on area of use.

Typical Use: A barrier coating for steel, giving higher levels of rust prevention and spreading than conventional single pack primers.

Application: Temperature of substrate should be a minimum of 3°C above the dew point, ideally 18°C – 21°C.
Airless spray: Recommended (15-19 thou tip; pressure 2500 psi)
Brush & roller: Recommended for smaller areas or touch ups.

Additional information

Additional information

Application Method Airless Spray, Brush or Roller
Surfaces For Steel- Rust Prevention
VOC Level 380g / Litre
Coverage 8m² / Litre
Touch Dry 15 Minutes @ +10°C
Over-Coating 2-4 Hours @ +10°C
Maintenance Cycle 2 Years
Thinning & Cleaning Marathon 737
Number of Coats 2