Rust-Oleum 2185 Galva Zinc Aerosol

In Stock

£11.50

  • Matt grey appearance
  • 90% zinc in the dry film (99% pure zinc)
  • To protect bare, rust free metal and galvanised
  • Ideal for touching-up welding seams
  • 500 ml

Read full description

Delivery information

Manufacturer: Rust-Oleum
Tags: , ,
Share on:

Description

Description

Rustoleum Galva Zinc 2185 is a fast drying, zinc rich primer that provides excellent corrosion resistance and cathodic protection of bar and galvanised steel. It is intended to be applied on small areas or for touch-up.

  • Best for protection
  • Matt grey appearance
  • 90% zinc in the dry film (99% pure zinc)
  • To protect bare, rust free metal and galvanised
  • Ideal for touching-up welding seams
  • Conforms to DIN 50.976 (1983)
  • Resists 500 hours of salt spray testing (DIN)
  • Can be recoated with non-saponifiable coatings.

Surface Preparation: Remove dirt, grease, oil, loose rust and all other surface contaminants by appropriate means. The surface must be clean and dry during application.

Typical Use: Rust-oleum 2185 Galva Zinc should be used on new, bare steel or galvanised steel surfaces. It is intended to be applied on small areas or for touch-up. The Spray can be recoated with non-saponifiable coatings. Rust-oleum Zinc Spray 2185 should be used as a primer or as a single coat in light industrial exposures, corrosive environments and high humidity areas.

Application: For good results the relative humidity shall be below 85% and the temperature of the can and substrate above 0°C.

Additional information

Additional information

Appearance Matt Grey
Zinc 90%
Aluminium 0%
Tack Free 10 / 15 minutes
To Handle 30 minutes / 2 hours
Heat Resistance 450°C / 100°C
VOC Level 630g / Litre
Coverage 1.4m² Per Spray Can
Maintenance Cycle Up to 3 Years
Number of Coats 1