Jotun Epoxy HR

In Stock

£229.13

  • 20 Litres
  • Includes Hardener
  • Heat resistant up to 205 °C (400 °F)

Read full description

Clear

Delivery information

Manufacturer:Jotun
Tags: ,
Share on:

Description

Description

Jotun Epoxy HR
Jotun Epoxy HR is a two-component polyamine cured phenolic/novolac epoxy coating which is heat resistant up to 205°C and can be applied on hot substrates up to 150°C.

Who is Jotun Epoxy HR for?
Jotun Epoxy HR is used as a primer, mid-coat, or finish coat in atmospheric environments. It is suitable for properly prepared carbon steel, galvanised steel, stainless stell and aluminium substrates. Epoxy HR is designed as corrosion protection for surfaces operating at elevated temperatures where long corrosion protection is desired and is suitable for insulated and non-insulated surfaces.

Jotun Epoxy HR can be applied using airless spray or a brush is recommended for stripe coating and small areas however extra care must be taken to achieve the specified dry film thickness

Pros & Cons of Jotun Epoxy HR
Pros:
– Corrosion protection
– Good heat resistance
– Suitable for insulated and non-insulated surfaces

Cons:
– Need to Mix Both Parts
– Needs to be used within 4 hours of being mixed (at 23 ºC)

Additional information

Additional information

Mixing Ratio6.5 Parts (comp A) to 1 Part (comp B)
Pot Life Once Mixed @ 23ºC4 Hours
Dry Film Thickness100-200 µm
Wet Film Thickness160-320 µm
Theoretical Spreading Rate6.3-3.2 M²/L
Surface (touch) Dry @ 23ºC2 Hours
Walk-On-Dry @ 23ºC10 Hours
Dried/Cured for Service @ 23 ºC3 Days

This information is given to the best of Jotun’s knowledge based on lab testing and experience

 

Downloads