Description

Anker Stuy Maintenance Box
Anker Stuy Maintenance Box contains Protection Wax, a Cleaning Agent and a Sponge which will help to extend the lifespan of the decorative finish and also the joinery when wiped down on a  regular basis to remove dirt and insects. It can also be done at the same time as cleaning the glass.

When the windowpanes are cleaned it is strongly advised that the coated timber surfaces are also cleaned. Any mould or algae that are present should be removed by washing with a diluted solution of household bleach (2 parts water, to 1 part bleach). Rinse with clean water after washing with bleach solution.

Every six months (in early spring and early autumn) clean the coated surfaces with the Anker Stuy cleaning product which is included in the care sets. Make sure that all cleaning residues and remaining dirt are wiped off and allowed to dry.

Once the surface is clean and dry, apply the wax component with the black applicator, (the applicator is included in the care sets).

How to use the Anker Stuy Maintenance Box

Protection Wax
Ankur Stuy Protection Wax is a professional protective layer for wooden window frames and doors.

Application
As a protective wax layer for wooden windows and doors that are painted with an Anker Stuy paint system, this wax will create a protective layer that can withstand different weather conditions and extends the life and durability of the paint system. The wax will upgrade your wooden element and extend the life and durability of the paint film.

Instructions for use
Before use, clean the surface with the corresponding cleaning agent. Shake the bottle well before opening it and once the surface is completely dry the wax can be applied with a brush, roller or cloth. The wax will leave a fresh and glossy appearance and the drying time is approximately 30 minutes.

Store in a cool, dry and frost-free place. Can be stored for 12 months once opened

Cleaning Agent
Anker Stuy Cleaning Agent is used to professionally clean wooden window frames and doors.

Application.
For professionally cleaning wooden windows frames and doors as preparation of the surface for applying the Protection Wax.

Instruction for use.
First clean the window frame or door with hot water and a sponge and then apply the cleaning agent to the enclosed cloth and rub the surface well. After Cleaning, wipe the surface with a dry cloth. In case of solid dirt, apply the cleaner to the surface again and wait approximately 3 minutes, wipe it clean and then wipe with a dry cloth.

Store in a cool, dry and frost-free place. Can be stored for 12 months once opened.

Additional information

SAFETY RULES

Cleaning Agent
Flammable liquid and vapour. Irritating to the eyes, keep out of reach of children and pets. Do not keep near heat / Sparks / open flames / hot surfaces. Keep the container tightly closed. Wash your hands thoroughly after use. Wear protective gloves / protective clothing/eye protection/face protection. In case of contact with skin or hair: immediately remove any contaminated clothing and rinse the affected area thoroughly with water. In case of contact with the eyes: gently rinse with water for several minutes. Keep rinsing. If irritation persists, please consult a qualified doctor. In case of fire use foam to extinguish. Keep in a well-ventilated and cool place.

Ingredients <5% EDTA, <5% non-ionic surfactants. UN: 1993

VOS value: 103 g/l.

Protection Wax

Contains 1,2- BENZISOTHIAZOOL-3 (2H)- ON.  VOS Value: 32g/l.

It may cause an allergic reaction. Wash affected areas thoroughly, and always consult a qualified doctor.