Jotun Jotamastic 80

In Stock

From £50.30(ex VAT)

  • Minimal surface preparation
  • Good resistance to solvent & chemicals
  • High solids product
  • Includes hardener

Read full description


Delivery information

Share on:



Jotamastic 80 is a two pack, surface-tolerant, high solids, epoxy mastic coating for repair and maintenance. It is specially designed for areas where optimum surface preparation is not possible or desired, and as a solution for less severe environments.

Jotamastic 80 is an anticorrosive coating which can be used as primer, mid coat and finish coat or as single coat system in atmospheric and immersed
environments (aluminium versions for use below water). Can be applied at sub zero surface temperatures.

Surface Preparation: All surfaces should be clean, dry and free from contamination. The surface should be assessed and treated in accordance with ISO 8504.
Bare steel: Cleanliness: Power tool cleaning to min. St 2, mill scale free (ISO 8501-1:2007). Improved surface treatment (blast cleaning to Sa 21⁄2)will improve the performance. In case of hydrojetting the flash rust degree shall not exceed moderate in SSPC and NACE standards for water prepared surfaces.
Shop primed Steel: Clean, dry and undamaged approved shopprimer.
Coated Surfaces: Clean, dry and undamaged compatible primer. Contact us for more information. For maintenance UHPWJ to WJ2 (NACE No.5/SSPC-SP12) or Power tool cleaning to min. St 2 for rusted areas.
Other surfaces: The coating may be used on other substrates.

Please contact us for more information.

Typical Paint System: Jotamastic 80 2 x 100 μm (DFT) followed by Hardtop AS 1 x 50 μm (DFT). Other systems may be specified, depending on area of use.

Typical Use:
General: Primarily designed for maintenance and repair. Only aluminium containing versions to be used in immersed environments.
Marine: Outside hulls, exterior and interior areas.
Protective: Recommended for offshore environments, refineries, power plants, bridges, buildings, mining equipment and general structural steel.

Spray: Use airless spray.
Brush: May be used. Care must be taken to achieve the specified dry film thickness.
Roller: May be used. Care must be taken to achieve the specified dry film thickness.

Additional information

Additional information

Application Method  Airless Spray, Brush or Roller
Surfaces  Maintenance & Repair / Marine/ Buildings
VOC Level 178g / Litre
Coverage  4m² / Litre
Touch Dry  8 Hours @ 10°C / 2 Hours @ 40°C
Over-Coating 24 Hours @ 10°C / 4 Hours @ 40°C
Pot life @ 23°C  Standard – 2 Hours
Winter 1 Hour
Maintenance Cycle 4 Years
Thinning & Cleaning  Jotun No.17
Number of Coats  2