SKU: 9139-X 100

Jotun Penguard Express ZP

In Stock


  • Fast drying
  • High solids
  • Includes Hardener

Read full description


Delivery information

Share on:



Jotun Penguard Express ZP
Jotun Penguard Express ZP is a two-component amine cured epoxy coating which is fast drying, zinc phosphate pigmented, high solids and high build. It is specially designed for new construction where fast dry to handle and over coating times are required and can also be applied at sub-zero temperatures.

Who is Jotun Penguard Express ZP for?
Jotun Penguard Express ZP can be used as a primer, mid coat, finish coat, or as a single coat system in atmospheric environments and is suitable for properly prepared carbon steel substrates and can be used on structural steel and popping to be exposed to highly corrosive environments. Penguard Express ZP is recommended for offshore environments, refineries, power plants, bridges, buildings, and mining equipment
Jotun Penguard Express ZP can be applied using airless spray, or a brush is recommended for stipe coating and small areas with care taken to achieve the specified dry film thickness.

Pros & Cons of Jotun Penguard Express ZP
– Fast Drying
– High Solids and High Build
– Can be applied at sub-zero temperatures.

– Need to Mix Both Parts
– Needs to be used within 2 hours of being mixed (at 23 ºC)

Additional information

Additional information

Mixing Ratio4 Parts (comp A) to 1 Part (comp B)
Pot Life Once Mixed @ 23ºC2 Hours
Dry Film Thickness75-250 µm
Wet Film Thickness100-340 µm
Theoretical Spreading Rate9.9-3 M²/L
Surface (touch) Dry @ 23ºC1 Hours
Walk-On-Dry @ 23ºC3 Hours
Dried/Cured for Service @ 23 ºC4 Days

This information is given to the best of Jotun’s knowledge based on lab testing and experience