Quick Add Related Products
The products listed below are selected to compliment or work best with this product. Simply tick the box beside the product and select the quantity you require, and click the add to basket button below the list, or click the product name to view the product in more detail. Some products will require selection of options, so cannot be added directly from here. If this is the case, simply click the product name to go to the product page to select your options.
Buy | Name | Price |
---|---|---|
Anker Stuy Hydrolux End Grain Sealer - Clear | £13.76 | |
Anker Stuy Hydrolux End Grain Sealer - White | £14.81 | |
Sayerlack XA469 End Grain Sealer | £14.46 |
Sayerlack AM495/13 External High-Build WB Basecoat – White
In Stock
£69.06 – £260.99
- Good results on difficult wood species
- Has good insulating power
- Waterborne thixotropic basecoat
Description
Description
Sayerlack AM495/13 External High-Build WB Basecoat
Sayerlack AM495/13 External High-Build WB Basecoat is a waterborne thixotropic basecoat with good insulating power against wood extractives and resin. Good results have also been achieved on difficult wood species such as Pine, Oak, Chestnut, Iroko, Nianggon, Accoya and other exotic woods.
Who is Sayerlack AM495/13 External High-Build WB Basecoat for?
Sayerlack AM495/13 External High-Build WB Basecoat can be used on door and window frames, and wooden items exposed to outdoors and can be applied using Airless, airmix or electrostatic spray. It ready to use for spray applications but, if necessary, can be diluted with tap water from 5-10%
Typical Paint System
2 coats of Sayerlack AML3519/13 External High-Build WB Primer or Sayerlack AM495/13 External High-Build WB Basecoat followed by 1 coat of Sayerlack AZ0097 Joinery Topcoat
Additional information
Additional information
Dust Free Dry (100g/m² @ 20°C) | 20 Minutes |
Touch Dry (100g/m² @ 20°C) | 50 Minutes |
Stackable (100g/m² @ 20°C) | 24 Hours |
Shelf Life | 15 Months |
The data supplied is to the best knowledge and experience of Sayerlack. Responsibility of the final result of the product application is fully up to the users who shall make sure that the product corresponds to their own needs with regard to application system, substrates used and working conditions.